We are sorry, our products currently do not support connecting to other brands.

Sorry, our product currently only supports automatic answering of WhatsApp calls on Apple phones.

Our intercoms are waterproof, but since they are electronic products, you should try to avoid excessive contact with water, otherwise it may reduce the product's lifespan.

Our intercoms light up red while charging; the light turns off when they are fully charged. Additionally, they cannot be used for intercom purposes while charging.

After installing the product on the helmet, there are significant differences in sound effects and volume. Please adjust the position of the speakers inside the helmet. Then check whether the microphone and device are correctly plugged in.

Our product sometimes experiences interference from signals and obstacles, especially signal interference from traffic lights, which can be quite significant. You can try resetting the intercom first, then slow down appropriately, and keep your phone about 10 meters away from you.

Is your helmet a full-face or a half-face helmet? The noise reduction of a half-face helmet is slightly weaker than that of a full-face helmet, so some noise may still be present. What is your approximate riding speed? You can try to check if the microphone is properly plugged in, and then ride at a slightly slower speed. If the problem remains unresolved, you are welcome to contact our online customer service.

Please first correctly connect the intercom according to the instructions, then try swapping the two microphones. If the same microphone still has no sound, you can contact online customer service for related after-sales support.

You can first reset the two earphones, and then reconnect them for intercom according to the method in my manual. Reset method: Without connecting to Bluetooth, press and hold the volume up and down buttons simultaneously to reset the intercom

Hello, after receiving the product, it needs to be charged for more than 2 hours. If you don't plan to use the product for an extended period and it remains in standby mode, it's best to charge it at least once a month.

Hello, the battery level displayed on the phone may occasionally be inaccurate. Please use the charging light turning off as the reference.

We apologize, but please refrain from using your own charger to charge the intercom, as unstable circuits may damage the intercom's battery.

This product has a one-year warranty. Within the warranty period, damage not caused by human factors is eligible for free repair. Damage caused by human factors is not covered by the warranty. Human caused damage includes but is not limited to: physical damage resulting from drops, collisions, squeezing, or other external forces; damage caused by improper operations such as using non-standard accessories or using beyond the rated scope; malfunctions due to unauthorized disassembly, modification, or non-official authorized repairs; damage caused by liquid spills or foreign objects entering the device, and similar issues.。

We sell individual accessories, but please ensure that you specify the product model for which you need accessories when making a purchase. Additionally, please note that our accessories do not include Velcro.

Sequentially attach the two height pads and the two hook-and-loop speaker pads near the ear area of the helmet. Complete helmet installation: Connect the two speakers to the hook side of the speaker pads; when connecting the speakers, the one with the shorter cable should be installed on the left side. Half helmet installation: Attach a hook side mic pad to the hard microphone, connect a loop side mic pad inside the helmet, and then connect the hook side mic pad to the loop side mic pad.

Our products come fully equipped with brackets, microphones, Velcro, and manuals. If you encounter any issues during installation or use, please don't hesitate to contact us at your convenience.

Hello, can you check whether the music transmission and reception settings of the two earphones are reversed? Connect one earphone to the phone as the music transmitter and the other as the music receiver.

Our headphones currently lack strong bass and noise-canceling capabilities. Still, the performance of our current products has been tested by authoritative institutions and meets market standards. We are continuously working on upgrades and improvements. Thank you very much for your attention and support for our products.

May I ask if your earphones have been exposed to water or dropped? You can first reset both earphones and then connect them. Please also record a video of your operation and send it to us.

May I ask if you have fully charged the headphones? Our headphones display a red light while charging, and the light turns off when the headphones are fully charged. You cannot turn them on and connect them while charging. You can turn on and connect the headphones by long-pressing the power button after the light turns off when the headphones are fully charged.

When powering on without connecting Bluetooth and the intercom, press and hold both the volume down and volume up buttons for 5 seconds. After the indicator light flashes quickly, it will restore factory settings and clear all pairing information.

Hello, sir/madam. Soft foam is suitable for full-face helmets, while hard foam is suitable for half and modular helmets.

Hello, the GT0does not have an intercom function; it is just a headset and cannot be connected to other headsets. You need to connect via Bluetooth to make calls and listen to music, and it also doesn't have the ability to share music.

Please first turn on Bluetooth on your phone, then press and hold the power button on the headphones, and tap the device "Blaise GT0" on your phone to connect.